Featured Articles
Top 5 Lazyboy Recliners for 2017
Are you in the market for a Lazyboy recliner but don’t know which one to get? What may seem like a simple decision can become a head-scratching dilemma, with all the different models that are available. Lazyboys are stylish and comfortable, making for a good addition to any living space for maximum relaxation – it is no wonder that you want to get one. Read on because we have narrowed it down for you to the top five choices for 2017.
1. Tripoli Reclina-Rocker Recliner
2. Intermission PowerReclineXR+ Reclina-Rocker Recliner
3. Coleman PowerReclinerXR Reclina-Rocker Recliner
4. Gabe Recline-Rocker Recliner
5. Beckett Reclina-Glider Swivel Recliner
There are many great choices in 2017 when it comes to Lazyboy recliners, and each and every one of these would make a great addition to your current furniture. But it all boils down to personal preference, and we hope we have made the decision easier for you.
Lazyboy Recliner: Feet Don’t Touch Floor and Leans Too Far Back
With the style and comfort that a Lazyboy recliner provides, every living room, family room and bachelor pad can benefit from it in terms of aesthetics and functionality. Being able to lay back after a hard day’s work and relax is what makes owning a Lazyboy recliner worth it. That is why when your feet aren’t touching the ground, you get frustrated, since you are unable to relax properly. This is a problem that you need to fix as soon as possible.
Pitch Needs Adjustment
The base of the Lazyboy recliner may be too high from the ground, and this is what prevents your feet from touching the floor. To solve this, the pitch needs to be adjusted downwards to lower the base.
Perform the steps below to adjust the chair’s pitch:
– You need to gain access to the chair’s mechanism, which is located underneath its base. Flip the chair over in order to do this.
– Loosen the back screws on either side of the mechanism without removing it.
– Remove the front screws from the mechanism on either side.
– For the recliner to pitch downwards, grab the frame and slide it forward. This will lower the base.
– In the front of the base, there is a slot with grooves in it. You can place the front screws on the grooves on either side to determine the base setting for the pitch. There should be five grooves, which allows for up to five base settings.
– After the base settings are set, make sure that the back and front screws are tightened before turning the chair back over.
– Test to ensure the problem has been fixed (your feet are able to touch the floor).
In order to see how to perform the above mentioned steps, the video below shows how simple performing the steps actually is. It takes you through the whole process of adjusting the pitch, with explanations of what is happening, and you can follow along to make sure that the recliner’s pitch is set downwards properly.
Your Height is the Problem or the Recliner Just isn’t for you
You might also just have to accept that you are too short if your feet don’t touch the ground after you have adjusted the Lazyboy recliner’s pitch. Purchasing a footrest may be a better option for you in this case. You can also return the chair and get another model that suits you better or get a refund if the footrest is not an option.
Purchase a Footrest
This is the best option if you are unable to perform a pitch adjustment. A footrest will easily restore the comfortability of the Lazyboy recliner by making sure your feet get the support they need, allowing you to relax better. On top of that, it will help with active sitting by enabling you perform the rocking motion and will also increase blood circulation to the legs.
It is hard to achieve maximum relaxation in your Lazyboy recliner when your feet don’t touch the ground. Not to mention that this can potentially cause back and circulation problems in the long-run. You need to get the best sitting experience you can from your Lazyboy recliner and ensure that your feet are adequately supported.
Lazyboy Power Recliner Parts and Repair
The best thing about power electric recliners is how simple they are to use, right? But since they have all those electric parts that make that possible, they must be very difficult to maintain. Well, guess again! Thanks to the fact that most chairs of this kind are manufactured using the exact same parts, they are actually very easy to repair. Here are the three most common issues with power electric recliners, as well as a description of the replacement parts people usually buy.
Loose plugs
Almost 80% of malfunctions happen because of loose in-line plugs. The first sign of this being the problem is the fact that your chair stopped working while in the open position. If that is the case, use a flashlight to check its underside. You will be looking for any loose connections in the wiring that goes around the base. Once you have spotted it, the only thing you will have to do is reconnect and secure it with electrical tape.
Power surges and electrical storms
These are the second most common cause of problems with power electric recliners. To determine whether this is the case, look for the green light that should be located somewhere on your chair. If it is still on, you will have to continue with your diagnostics, but if it is out, there is definitely a problem with the power supply. This means you will have to get a replacement transformer.
Severed wires
If you notice a problem while the recliner is closing, especially if one of the signs are sparks, there is probably a cut on one of the wires. Take your flashlight and check the underside of the chair to locate it. If you see one, take the loose strands and wrap them around each other to reconnect the wire. Finish by securing the spot with electrical tape.
The most commonly bought replacement parts:
Okin Replacement Transformer Set
In conclusion, repairing your power electric recliner is not as difficult as it might sound. It is likely that you will have to spend no more than half an hour to resolve the issue, whatever it might be. And once you have done that, you will be able to relax just as you did before you were interrupted.
DIY: Re-Upholstering Your Lazyboy Recliner
When it comes to recliners, you can’t do better than Lazyboy! These chairs are capable of providing you with the maximum amount of comfort, not only thanks to their super comfy cushions, but also to their high-quality reclining mechanisms. After all, nothing beats laying back and putting your feet in the air after a long day at work. But what about your decor? Since these are some of the sturdiest chairs available, there is no need for buying a new one every couple of years. And although that is one of their biggest advantages, it also means that you will be stuck with the pattern you choose for a really long time. Or does it? In this post, we are going to show you how you can reupholster your Lazyboy recliner by yourself quickly and with a minimum amount of effort.
Materials that are needed for reupholstering a Lazyboy chair:
– Fabric (approximately 7 yards) (buy)
– Covered buttons (buy)
– Waxed thread (buy)
– Upholstery needles (buy)
– Thread and needle (buy)
– Seam ripper (buy)
– Tack remover (buy)
– Hot glue gun (buy)
– Scissors (buy)
– Staples (buy)
– Staple gun (buy)
How to reupholster your Lazyboy chair – a step-by-step guide:
Step 1
After you are done preparing all the tools and materials you are going to need for this job, your first step will be disassembling the recliner. You won’t have any trouble removing its back, but the seat might prove to be a lot more stubborn. If you would like to avoid wasting time, start by flipping the chair and checking the underside for any screws that might have been used to attach the seat to the frame. Only after you have dismantled the chair completely can you move on to the next step.
Step 2
This is where the tack remover and the seam ripper will come in handy. You will need to remove the old fabric so you can start stapling the new one. You might get tempted to skip this step, but keep in mind that your decision will affect the end result. By choosing to go through with it, you will end up with a better-looking chair, but you will also make the stapling part a lot easier for yourself. This is because you will be able to use the old pieces of fabric to cut the new ones with higher precision.
Step 3
Take the new fabric and cut it into smaller pieces, all the while being careful not to mess up the dimensions. By using the old pieces of fabric for tracing, you will be able to do this a lot faster and without putting too much effort into the process. If you want your chair to look like it has been done by a professional, iron the fabric both before tracing and before moving to the following step.
Step 4
Using the staple gun, attach each piece of fabric to their respective parts of the frame. It would be best to start with the middle parts, since the corners can be a bit tricky. While stapling the fabric over the outer parts, make sure you pull it tight over the frame. The trick to getting the perfect corners is to fold and staple the fabric until they are just the way you want them.
Step 5
Don’t be surprised when you find parts that are made of cardboard – using it is standard practice in the production of recliners. But don’t try to upholster them the way you did the rest of the chair, either, since they should be done using a hot glue gun.
Step 6
Use the covered buttons to finish reupholstering your recliner. There is no need to tell you how to do this, since there will be instructions on the back of the package.
Step 7
Although this step is optional, you will need to go through with it if you want to tuft the cushion. You can do this by using the upholstery needle and the waxed thread from the list.
Step 8
Put each of the parts back in its place, but make sure to do it right. You can make it a lot easier for yourself by taking pictures of the process of disassembling the chair so you can trace your steps later on and avoid making a mistake.
Now that you are familiar with the process of reupholstering a recliner, you probably don’t think it would be impossible for you to do it by yourself. Of course, it requires a significant amount of time and patience, but it is actually a pretty straightforward task that could result in a complete transformation of your living room. Some of the steps are more demanding than others, but none of them is something you couldn’t handle. So choose a pattern you love and start reupholstering!
Make sure to properly clean your newly reupholster chair and take care of the fabric.
