Lazyboy Recliner: Feet Don’t Touch Floor and Leans Too Far Back

With the style and comfort that a Lazyboy recliner provides, every living room, family room and bachelor pad can benefit from it in terms of aesthetics and functionality. Being able to lay back after a hard day’s work and relax is what makes owning a Lazyboy recliner worth it. That is why when your feet aren’t touching the ground, you get frustrated, since you are unable to relax properly. This is a problem that you need to fix as soon as possible.

Pitch Needs Adjustment
The base of the Lazyboy recliner may be too high from the ground, and this is what prevents your feet from touching the floor. To solve this, the pitch needs to be adjusted downwards to lower the base.

Perform the steps below to adjust the chair’s pitch:
– You need to gain access to the chair’s mechanism, which is located underneath its base. Flip the chair over in order to do this.

– Loosen the back screws on either side of the mechanism without removing it.

– Remove the front screws from the mechanism on either side.

– For the recliner to pitch downwards, grab the frame and slide it forward. This will lower the base.

– In the front of the base, there is a slot with grooves in it. You can place the front screws on the grooves on either side to determine the base setting for the pitch. There should be five grooves, which allows for up to five base settings.

– After the base settings are set, make sure that the back and front screws are tightened before turning the chair back over.

– Test to ensure the problem has been fixed (your feet are able to touch the floor).

In order to see how to perform the above mentioned steps, the video below shows how simple performing the steps actually is. It takes you through the whole process of adjusting the pitch, with explanations of what is happening, and you can follow along to make sure that the recliner’s pitch is set downwards properly.

Your Height is the Problem or the Recliner Just isn’t for you
You might also just have to accept that you are too short if your feet don’t touch the ground after you have adjusted the Lazyboy recliner’s pitch. Purchasing a footrest may be a better option for you in this case. You can also return the chair and get another model that suits you better or get a refund if the footrest is not an option.

Purchase a Footrest
This is the best option if you are unable to perform a pitch adjustment. A footrest will easily restore the comfortability of the Lazyboy recliner by making sure your feet get the support they need, allowing you to relax better. On top of that, it will help with active sitting by enabling you perform the rocking motion and will also increase blood circulation to the legs.


It is hard to achieve maximum relaxation in your Lazyboy recliner when your feet don’t touch the ground. Not to mention that this can potentially cause back and circulation problems in the long-run. You need to get the best sitting experience you can from your Lazyboy recliner and ensure that your feet are adequately supported.

Lazyboy Power Recliner Parts and Repair

The best thing about power electric recliners is how simple they are to use, right? But since they have all those electric parts that make that possible, they must be very difficult to maintain. Well, guess again! Thanks to the fact that most chairs of this kind are manufactured using the exact same parts, they are actually very easy to repair. Here are the three most common issues with power electric recliners, as well as a description of the replacement parts people usually buy.

Loose plugs
Almost 80% of malfunctions happen because of loose in-line plugs. The first sign of this being the problem is the fact that your chair stopped working while in the open position. If that is the case, use a flashlight to check its underside. You will be looking for any loose connections in the wiring that goes around the base. Once you have spotted it, the only thing you will have to do is reconnect and secure it with electrical tape.

Power surges and electrical storms
These are the second most common cause of problems with power electric recliners. To determine whether this is the case, look for the green light that should be located somewhere on your chair. If it is still on, you will have to continue with your diagnostics, but if it is out, there is definitely a problem with the power supply. This means you will have to get a replacement transformer.

Severed wires
If you notice a problem while the recliner is closing, especially if one of the signs are sparks, there is probably a cut on one of the wires. Take your flashlight and check the underside of the chair to locate it. If you see one, take the loose strands and wrap them around each other to reconnect the wire. Finish by securing the spot with electrical tape.

The most commonly bought replacement parts:

Belkin Surge Protector

Belkin Outlet Surge Protector
Designed to protect your chair from getting damaged by power surges and electrical storms, this device does its job perfectly. It features 12 outlets, and with 3940 joules and 500V, it can even manage to protect professional workstations. Its 8-foot cord makes it even more useful.

Okin Power Supply Cable

Okin Power Supply Cable
Getting the right power supply cable helps you protect your recliner from malfunctioning. It connects the power supply transformer with the motor of the chair. This particular product is compatible with a wide range of devices, and its connector has both flat and round ends.

Okin Replacement Transformer Set

Okin Replacement Transformer Set
This set was the first choice of many people whose chair was in need of a new transformer. It consists of a power cord, a power supply device and a motor to power supply cable. It can be used with a variety of other devices.

Okin 2-Button Remote Control

Okin 2-Button Hand Control
This handy little product might make a world of difference when it comes to relaxing in your power electric recliner. One of the reasons why it is so popular is the fact that it can be used with a wide range of chairs.

Okin Replacement Motor

Okin Replacement Motor
If your recliner is in need of a new motor, this particular product should be your first choice. It has been rated the best of its kind by hundreds of satisfied customers, and is compatible with both Limoss and Okin motors.

In conclusion, repairing your power electric recliner is not as difficult as it might sound. It is likely that you will have to spend no more than half an hour to resolve the issue, whatever it might be. And once you have done that, you will be able to relax just as you did before you were interrupted.

DIY: Re-Upholstering Your Lazyboy Recliner

When it comes to recliners, you can’t do better than Lazyboy! These chairs are capable of providing you with the maximum amount of comfort, not only thanks to their super comfy cushions, but also to their high-quality reclining mechanisms. After all, nothing beats laying back and putting your feet in the air after a long day at work. But what about your decor? Since these are some of the sturdiest chairs available, there is no need for buying a new one every couple of years. And although that is one of their biggest advantages, it also means that you will be stuck with the pattern you choose for a really long time. Or does it? In this post, we are going to show you how you can reupholster your Lazyboy recliner by yourself quickly and with a minimum amount of effort.

Materials that are needed for reupholstering a Lazyboy chair:

– Fabric (approximately 7 yards) (buy)
– Covered buttons (buy)
– Waxed thread (buy)
– Upholstery needles (buy)
– Thread and needle (buy)
– Seam ripper (buy)
– Tack remover (buy)
– Hot glue gun (buy)
– Scissors (buy)
– Staples (buy)
– Staple gun (buy)

How to reupholster your Lazyboy chair – a step-by-step guide:

Step 1
After you are done preparing all the tools and materials you are going to need for this job, your first step will be disassembling the recliner. You won’t have any trouble removing its back, but the seat might prove to be a lot more stubborn. If you would like to avoid wasting time, start by flipping the chair and checking the underside for any screws that might have been used to attach the seat to the frame. Only after you have dismantled the chair completely can you move on to the next step.

Step 2
This is where the tack remover and the seam ripper will come in handy. You will need to remove the old fabric so you can start stapling the new one. You might get tempted to skip this step, but keep in mind that your decision will affect the end result. By choosing to go through with it, you will end up with a better-looking chair, but you will also make the stapling part a lot easier for yourself. This is because you will be able to use the old pieces of fabric to cut the new ones with higher precision.

Step 3
Take the new fabric and cut it into smaller pieces, all the while being careful not to mess up the dimensions. By using the old pieces of fabric for tracing, you will be able to do this a lot faster and without putting too much effort into the process. If you want your chair to look like it has been done by a professional, iron the fabric both before tracing and before moving to the following step.

Step 4
Using the staple gun, attach each piece of fabric to their respective parts of the frame. It would be best to start with the middle parts, since the corners can be a bit tricky. While stapling the fabric over the outer parts, make sure you pull it tight over the frame. The trick to getting the perfect corners is to fold and staple the fabric until they are just the way you want them.

Step 5
Don’t be surprised when you find parts that are made of cardboard – using it is standard practice in the production of recliners. But don’t try to upholster them the way you did the rest of the chair, either, since they should be done using a hot glue gun.

Step 6
Use the covered buttons to finish reupholstering your recliner. There is no need to tell you how to do this, since there will be instructions on the back of the package.

Step 7
Although this step is optional, you will need to go through with it if you want to tuft the cushion. You can do this by using the upholstery needle and the waxed thread from the list.

Step 8
Put each of the parts back in its place, but make sure to do it right. You can make it a lot easier for yourself by taking pictures of the process of disassembling the chair so you can trace your steps later on and avoid making a mistake.

Now that you are familiar with the process of reupholstering a recliner, you probably don’t think it would be impossible for you to do it by yourself. Of course, it requires a significant amount of time and patience, but it is actually a pretty straightforward task that could result in a complete transformation of your living room. Some of the steps are more demanding than others, but none of them is something you couldn’t handle. So choose a pattern you love and start reupholstering!

Make sure to properly clean your newly reupholster chair and take care of the fabric.

Best Lazyboy Gift this Holiday

Would you say it was possible to make a Lazyboy recliner even more functional and comfortable? Well, the answer is definitely yes! So if one of your friends or a member of your family owns one of these chairs, stop worrying about what gift you are going to get them for the holidays and surprise them with one of these extremely useful recliner accessories.

Stretch Sensations Gray Slipcover

Stretch Sensations Gray Slipcover
If the person you are buying a gift for likes everything to be clean all the time, they might enjoy this high-quality slipcover. It is made of a material that stretches to fit a wide range of recliner styles, and features a really useful side pocket that can be used to store all sorts of items.

Furniture Fresh Anti-Slip Protector

Furniture Fresh Anti-Slip Protector
Made of a material that has been designed to protect recliners from getting damaged by spills, this product is the ideal present for those who like things to be clean, as well as those who tend to be clumsy. Its microsuede fabric is at the same time water resistant and highly durable.

NeckBone Pillow

NeckBone Pillow
If you want to give a gift that will increase comfort, get this chiropractic pillow. Thanks to its design, it makes sure that the neck and the head are both properly aligned. Its velour fabric makes it gentle to the touch, and it features a zipper that allows you to customize the shape.

Liquid Leather 7-Color Kit

Liquid Leather 7-Color Kit
If the person you are buying a gift for has a recliner with fading colors, this might be the ideal choice. The set consists of seven different colors, a mixing cup, an applicator and a spatula. Available colors include white, yellow, blue, red, brown, green and black.

Perfect Life Ideas 6-Pocket Organizer

Perfect Life Ideas 6-Pocket Organizer
For all those who like their things organized, this is the ideal recliner accessory. The organizer can be attached to the armrest, and is equipped with six pockets that can be used to store items such as remote controls, magazines and glasses. It also has a tray for snacks and drinks.

Foot Rest Lever

Foot Rest Lever
Would your friend or family member like to be able to control the foot rest with the use of a lever? If the answer is yes, then get them this handle. It can be installed on both sides of the chair, and it comes with all the things you will need for assembly.

It might be hard for you to choose among all these useful products. But since they are all so functional, we are certain that your friends and family are going to love them, especially for making their holiday season even more comfortable!

* This site contains affiliate links for which we may be compensated.

Enter your email address to subscribe for updates!